Cross compiling libEXIF for ARM on Ubutnu

libexif is a software library that allows you to add EXIF tags to JPEG images, for example when saving JPEG images via libJPEG.

The following is a log of the steps taken to cross compile libexif on ubuntu for an ARM IoT device, you will need the arm-linux-gnueabi tool-chain installed on your build machine:

1.) Download the latest libexif source code from:

2.) uzip & untar the software:

3.) Execute the following from bash or similar:

This should put the output files into /home/me/build_exif/_install ready for copying onto your ARM device.

libexif binaries for Windows and Visual Studio

32bit libexif binaries for Windows (and Visual Studio) which were compiled on Windows using this method, can be downloaded from here. These are unsupported & use them at your own peril, but they work fine for me!


Build libexif for Windows and Visual Studio

This is a record of how to build / compile libexif (v0.6.21) binaries for windows. It is another entry in a Software Engineer’s daily ‘trial log’, however this time thanks to the excellent MinGW32 and the well written libexif things went rather well!

This readme says that you have 2 options, either hack together a project in Visual Studio to build the library or use MinGW32 to build it.

I tried the first option, but the main problem is that poor old Visual Studio can’t handle some of the more modern standard C (C99) constructs that libexif uses (e.g. the inline keyword).

So that left the MinGW route which is detailed here:

1.) Install MinGW32 onto your windows machine if you don’t already have it. Florian Wolters has a good description of how to do this here (thanks!).

I found it vital to put the path to WinGW32’s bin directory at the beginning of my system PATH variable, not at the end! Check that MinGW32 is working ok by trying Florian’s little test program.

2.) Get the libexif source here. Extract it to somewhere.

3.) Open a windows console window (CMD), don’t use GitBash or anything, just cmd.exe, cd into the extracted libexif folder. I used GitBash at the begining but was getting make errors, it turned out that some of GitBash’s tools were conflicting with MinGW’s tools.

4.) Make libexif by issuing the following commands:

Now during make, you may get an error like this:

libtool: link: cannot find the library `/home/keith/staged/mingw32/lib/libiconv.’

If this happens, go to your MinGW lib directory (e.g. C:\MinGW\lib) and delete this file:

And try running make again, if you continue to get the above error, then the advice out there us to delete any files with ‘keith’ in them, but luckily I didn’t have to.

If make & make install succeed, you should then see the install directories in /tmp, which you can access using MS explorer in your MinGW\msys directory:

e.g. maybe in C:\MinGW\msys\1.0\tmp

Thankfully that all worked for me, I was then able to link to the libexif libraries from a Visual Studio 2012 C++ project. The only gotcha I found is that when freeing the char* buffer allocated during a call to exif_data_save_data(), I found it important not to use free() but to use libexif’s own memory deallacator like this:

This is probably due to my test application using a different malloc() to the lib.

To link to libEXIF from visual studio you can directly add libexif.dll.a to Properties / Linker / Input / Additional Dependencies and then just make sure that libexif-12.dll is somewhere on the execution path.

If you don’t fancy all of this hassle the library binaries can be downloaded from here.

Geotag – EXIF GPS Latitude field format with libEXIF

I have been developing some software to geotag jpeg images by adding EXIF GPS information using libEXIF. This is very handy as loads of applications like GIS systems and google maps etc can correctly geographically position your images.

As usual I started in the middle rather than starting at the beginning and got a bit confused by how GPS latitude and longitude fields are specified in EXIF, so I decided to try to describe it here with pictures (so that I can test out the google drawing app).

So, latitude (and longitude) can be expressed in different ways bit it is essentially just an angle. Common ways of expressing these angles are:

Degrees, minutes & seconds (with decimal places)
N 52 58 40.44

Degrees & minutes (with decimal places)
N 52 58.674

Degrees (with decimal places)

The EXIF latitude field allows you to specify the angle in all of these forms, it is made up of 3 parts as follows:

1.) Degrees – Rational (8 bytes)
2.) Minutes – Rational (8 bytes)
3.) Seconds – Rational (8 bytes)

Each part is an EXIF Rational, it is hard to find a description of its format, but a an EXIF rational contains two 4-byte words and is like a fraction. The first word specifies the value’s magnitude while the second denominates the units. Consider the following values, (where ‘/’ should be read as ‘over’ or ‘divided by’):

a.) 52 = 52 / 1 (52 units)
b.) 40.44 = 4044 / 100 (4044 hundredths)
c.) 52.97790 = 52977900 / 1000000 (52977900 millionths)
d.) 0 = 0/1

the last value ( 0/1 ) is handy as it allows us to specify, say, 0 seconds if we only want to provide degrees and fractional minutes.

To set a rational we can use libEXIF’s set_rational() function like this:

or more generally, if, for example, you want to set a value to 6 decimal places:

So now, given a latitude value in degrees, minutes and seconds all we have to do is create a EXIF_TAG_GPS_LATITUDE tag and add a rational for each. Imagine that we want to encode 52, 58, 44.44 then the tag data will then end up looking like this:

efix gps latitude format degrees minutes seconds

This is all very well but I don’t normally bother holding minutes and seconds in my code, instead I preferr to use a degree value to many decimal places, e.g. 52.97790, no problem, this is where our rational value 0 / 1 comes in handy – it can be represented as follows:

exif gps latitude format decimal degrees

So wrapping all of this up, here is some example code that sets a decimal degree value for latitude:

I will probably do another post that details how to write EXIF data into a jpeg image’s header using libEXIF and libJPEG

The google drawing app actually worked quite well!